Nuestra web utiliza cookies para asegurar la mejor experiencia al usuario. Para continuar navegando en nuestra web, usted está aceptando el uso de cookies. Más información

cerrarse Close Cookie Notification
Instron
  • Back
  • Home
  • Productos
    SISTEMAS DE PRUEBAS
    Sistemas de pruebas universales
    Resistencia estructural
    Sistemas de pruebas automatizados
    Sistemas de pruebas dinámicas y de fatiga
    Simulación de choque
    Medidores de torsión
    Reómetros y medidores de flujo de fusión
    Torres de impacto en caída libre y péndulos
    HDT y Vicat
    Sistemas fuera de producción
    ACCESORIOS
    Software
    Celdas de carga
    Extensómetros
    Desgarre, fricción, perforación
    Hornos y cámaras ambientales
    Mordazas de tracción
    Soportes de fijación flexibles
    Platos de compresión
    Celdas de carga
    Dispositivos microelectrónicos
    Dispositivos biomédicos/farmacéuticos
    Medición y preparación de probetas
    Todos los accesorios
    Catálogo de accesorios
  • Soluciones Industriales
    POR MATERIAL POR NORMA POR TIPO DE ENSAYO
    POR INDUSTRIA
    Aeroespacial
    Automotriz
    Biomédica
    Electrónica
    MATERIALES
    Composicion
    Rieles
    Plástica
  • Servicio y soporte
    Instron Remote Technical Support CICLO DE VIDA DEL PRODUCTO
    SERVICIOS
    Calibración y verificación
    Asistencia de implementación de Instron
    Mantenimiento preventivo
    Instalación y reubicación
    Reparación y restauración
    Actualizaciones
    CAPACITACIÓN
    Capacitación en sus instalaciones
    SOPORTE TÉCNICO
    Preguntas Frecuentes
    Servicios de actualización de software
    RECURSOS
    Manuales
    Localizador de número de serie
  • Nuestra empresa
    EMPLEO SALA DE PRENSA SUSCRÍBASE A NUESTRO BOLETÍN
    ACERCA DE NOSOTROS
    Nuestra historia
    Ubicaciones
    Acreditaciones y certificados
    RECURSOS
    Glosario
    Tipos de ensayos
    Newsletters
    Biblioteca de documentación
    Noticias
    Eventos
    Seminarios web
    Estudios de caso
  • Contáctenos
  • South America
Productos » Sistemas de ensayo » Structural Durability » Structural Durability Solutions » Biaxial Wheel Test System (ZWARP)

Biaxial Wheel Test System (ZWARP)

Menu
  • Structural Durability Solutions
    • Axle Test System
    • Component Test Systems
    • Dynamic Torsion Test System
    • Full Vehicle Test System
    • Road Simulator
    • Multi-Axis Shaking Table (MAST)
    • Shock Absorber Test Systems
    • Biaxial Wheel Test System (ZWARP)
Contact Us
  • DESCRIPCIÓN
  • Related Products
  • Software

Challenge

Wheels are critical safety-relevant components of the vehicle which are exposed to severe loads over the lifetime. Their reliability can only be safeguarded by performing tests under laboratory conditions which resemble actual loading conditions as closely as possible. Based on an idea of the FRAUNHOFER LBF the Biaxial Wheel Test Facility was developed in the early 1980´s. This test procedure became a standard at most of the European wheel producers and was also introduced as SAE wheel standard J 2562, in 2003. Standardized load profiles like Euro-Cycle or AK-Cycle had been developed which could reduce the test time to a minimum by transforming damage content of the original design spectra of 300.000 km to an accelerated one of 10.000 km only. Today an additional method for the generation of a load profile is available. By using this so called “Hayes Lemmerz” method the ZWARP’s control parameter could be determined directly from the wheel forces without the need for the long detour of strain gauge measurement.

Solution

The Biaxial Wheel Test Facility (ZWARP) further developed by Instron includes an additional hydraulic actuator which allows a controlled and highly accurate adjustment of the tilt angle to produce high lateral forces. It is also distinguished by its compact design, high robustness and extremely high reproduction quality. In addition to standardized load sequences (Euro cycle, AK cycle, SAE J2562, etc.), the patented Hayes Lemmerz process is also available. This makes possible a direct determination of the control parameters of a ZWARP only from the wheel forces without strain gauge measurements which lead to a further reduction of the test time and costs.

With more than 20 installed systems and a continuous adaptation to the requirements of our customers, today's ZWARP in its 5th generation represents an optimal test system for determining the operational safety of wheels.

Accessories

  • Various test drums for optimal adjustment of wheel and drum diameters
  • Wheel adapter
  • Hayes Lemmerz (Schwendemann) procedure (1 test stand license)

Literature

  • Patent: WO 2001071307 A1 “Control method for a bi-axial wheel test bench for simulating driving stresses and a bi-axial wheel test bench”
  • Hayes Lemmerz (Schwendemann) method (1 licence)

Controller Labtronic® 8800ml

Labtronic 8800ml, Instrons new test controller, provides an integrated laboratory solution for all requirements from component tests through to simulation of service loads on full vehicles.

Hydropuls® actuators

Hydropuls hydraulic actuators are used in the full of static and dynamic applications where high precision simulation of movement, forces, strains and accelerations are required.

Power Packs and accessories

A modular range of variable flow hydraulic power supplies are available to service dedicated test systems or to be configured as a central laboratory supply facility. Pipeline solutions are also available to safely distribute the hydraulic supply around the lab.

Sensors

A comprehensive range of fatigue rated precision transducers are available to measure position, force, torque, pressure, strain and acceleration.

Servo valves

To deliver the full range of actuator performance requirements, a range of 2 and 3 stage servo valves with flow rates from 5 liters to 2400 liters/min are available.

RSLabSite modulogic

All you need for your durability tests is the measurement data obtained from the proving ground – RS LabSite® modulogic will do the rest!

Selección Zona

Dismiss Region Selector

Americas

  • North America
  • Brasil
  • South America

All Other Countries

  • Global Site

Europe

  • France
  • Deutschland
  • Italia
  • Polska
  • España
  • Türkçe
  • United Kingdom

Asia Pacific

  • 中国
  • India
  • 日本
  • 대한민국
  • 台灣
  • ประเทศไทย
Instron Logo White
INFORMACIÓN DE CONTACTO

C/ Argenters 2,
Parque Tecnológico del Vallés,
08290 Cerdanyola,
Barcelona, Spain

General: +34 935 947 560

ENLACES ÚTILES
  • Sistemas de ensayos
  • Software
  • Accesorios
  • Catálogo
  • Glosario
  • Biblioteca
  • Soluciones de ensayos
  • Newsletters
  • Seminarios web
  • Estudios de caso
  • Eventos
  • Empleo
Policies / Legal
  • Política de privacidad y cookies
  • Condiciones de uso
  • Control de exportación
  • Aviso sobre datos del GDPR
CONECTE CON NOSOTROS
SUSCRÍBASE A NUESTRO BOLETÍN DE NOTICIAS
DIRECCIÓN DE CORREO ELECTRÓNICO
© Illinois Tool Works Inc. Todos los derechos reservados.
[email protected]
  • Política de privacidad y cookies
  • Condiciones de uso
  • Control de exportación
  • Aviso sobre datos del GDPR