Nuestra web utiliza cookies para asegurar la mejor experiencia al usuario. Para continuar navegando en nuestra web, usted está aceptando el uso de cookies. Más información

cerrarse Close Cookie Notification
Instron
  • Back
  • Home
  • Productos
    SISTEMAS DE PRUEBAS
    Sistemas de pruebas universales
    Resistencia estructural
    Sistemas de pruebas automatizados
    Sistemas de pruebas dinámicas y de fatiga
    Simulación de choque
    Medidores de torsión
    Reómetros y medidores de flujo de fusión
    Torres de impacto en caída libre y péndulos
    HDT y Vicat
    Sistemas fuera de producción
    ACCESORIOS
    Software
    Celdas de carga
    Extensómetros
    Desgarre, fricción, perforación
    Hornos y cámaras ambientales
    Mordazas de tracción
    Soportes de fijación flexibles
    Platos de compresión
    Celdas de carga
    Dispositivos microelectrónicos
    Dispositivos biomédicos/farmacéuticos
    Medición y preparación de probetas
    Todos los accesorios
    Catálogo de accesorios
  • Soluciones Industriales
    POR MATERIAL POR NORMA POR TIPO DE ENSAYO
    POR INDUSTRIA
    Aeroespacial
    Automotriz
    Biomédica
    Electrónica
    MATERIALES
    Composicion
    Rieles
    Plástica
  • Servicio y soporte
    Instron Remote Technical Support CICLO DE VIDA DEL PRODUCTO
    SERVICIOS
    Calibración y verificación
    Asistencia de implementación de Instron
    Mantenimiento preventivo
    Instalación y reubicación
    Reparación y restauración
    Actualizaciones
    CAPACITACIÓN
    Capacitación en sus instalaciones
    SOPORTE TÉCNICO
    Preguntas Frecuentes
    Servicios de actualización de software
    RECURSOS
    Manuales
    Localizador de número de serie
  • Nuestra empresa
    EMPLEO SALA DE PRENSA SUSCRÍBASE A NUESTRO BOLETÍN
    ACERCA DE NOSOTROS
    Nuestra historia
    Ubicaciones
    Acreditaciones y certificados
    RECURSOS
    Glosario
    Tipos de ensayos
    Newsletters
    Biblioteca de documentación
    Noticias
    Eventos
    Seminarios web
    Estudios de caso
  • Contáctenos
  • South America
Productos » Sistemas de ensayo » Structural Durability » Structural Durability Products » Sensors

Sensors

Menu
  • Structural Durability Products
    • Controller Labtronic® 8800ml
    • Hydropuls® actuators
    • Power Packs and Accessories
    • Sensors
    • Servo valves
    • Test frames and fixtures
Contact Us
Load Cell
loadcell
  • Load Cell
  • loadcell
  • DESCRIPCIÓN
  • Related Products
  • Software

Challenge

Durability testing requires a range of transducers that can provide critical feedback signals to the controller under dynamic loading conditions. As safety critical components, sensors need to be fatigue rated to survive the cyclic loads they experience during normal operation. Transducer calibration over the full measurement range needs to be accredited, repeatable and stable in order to guarantee the integrity of the test results. Test applications typically require special transducer designs to meet the demanding service loads and range of operational conditions.

Solution

Instron design and manufacture a wide range of transducers to meet the specific demands of test applications.  Sensors are available for static and dynamic force, torque, displacement, pressure, strain, acceleration and temperature measurement. All Instron transducers are suitable for use as control feedback sensors or for data acquisition of test results. Instron has accredited calibration laboratories and is able to provide on-site traceable calibration of force transducers to international standards.

Load Cells

Instron precision load cells are used to determine static and dynamic tensile and compressive forces, which are usually built up by a load unit and transferred to a test specimen. Together with measuring amplifiers, they form a highly accurate measuring system for the material and component testing as well as for vibration resistance tests in the force change range. On account of the different sizes, they can be selected correspondingly to the respective load units.

Torque transducer

The torque transducer PM-T allows a torque measurement on Hydropuls® rotary cylinders in conjunction with the measuring amplifier. In the torque transducer PM-T, a mechanical torque is converted into an electrical resistance change. The measuring amplifier converts this resistance change into an electrical voltage.

Axle Test System

Axle test rigs are used to reproduce different loads applied to the axle elements when a vehicle is traveling over a variety of road surfaces. Instron can provide models for testing of car, van, truck and bus axles with 6 degree-of-freedom.

Component Test Systems

Instrons component testing systems are characterized by the highest quality and reliability, ensuring the highest productivity in daily use.

Multi-Axis Shaking Table (MAST)

Multi-axis simulation (MAST) tables are designed for testing of a variety of different specimens in six degrees of freedom. These include components and subassemblies exposed to vibratory loads during vehicle operation; from seats, dashboards and interior equipment components to engine mounts, and cooling modules.

Road Simulator

HYDROPULS® road simulators are a versatile and cost efficient solution for testing load inputs through the tires. They are used to perform durability tests, as well as acoustic and vibration analyses in testing and development (BSR, NVH) on complete vehicles, subsystems and power train assemblies.

Full Vehicle Test System

Instron offers comprehensive solutions with and without vehicle restraint, with long- or short-stroke introduction of lateral forces as well as the optional environmental simulation with regard to temperature humidity and sun loading.

Biaxial Wheel Test System (ZWARP)

The Biaxial Wheel Test (ZWARP) developed by Instron includes an additional hydraulic actuator which allows a controlled and highly accurate adjustment of the angle of attack to produce high lateral forces.

Dynamic Torsion Test System

The dynamic torsion test stand is designed for the operational fatigue testing of torsional vibration dampers under rotational speed.

Shock Absorber Test Systems

Instron's MSP test system is the ideal tool for reliable, fast and realistic tuning of vehicle chassis designs and development of shock absorber systems.

Elastomer Test System VHF and MHF

The MHF and VHF excel outstanding flexibility and the capability to adapt to constantly changing requirements of the viscoelastic properties of elastomeric suspension and chassis components. They are designed specifically for optimum testing of these components to establish their dynamic characteristics.

RSLabSite modulogic

All you need for your durability tests is the measurement data obtained from the proving ground – RS LabSite® modulogic will do the rest!

Selección Zona

Dismiss Region Selector

Americas

  • North America
  • Brasil
  • South America

All Other Countries

  • Global Site

Europe

  • France
  • Deutschland
  • Italia
  • Polska
  • España
  • Türkçe
  • United Kingdom

Asia Pacific

  • 中国
  • India
  • 日本
  • 대한민국
  • 台灣
  • ประเทศไทย
Instron Logo White
INFORMACIÓN DE CONTACTO

C/ Argenters 2,
Parque Tecnológico del Vallés,
08290 Cerdanyola,
Barcelona, Spain

General: +34 935 947 560

ENLACES ÚTILES
  • Sistemas de ensayos
  • Software
  • Accesorios
  • Catálogo
  • Glosario
  • Biblioteca
  • Soluciones de ensayos
  • Newsletters
  • Seminarios web
  • Estudios de caso
  • Eventos
  • Empleo
Policies / Legal
  • Política de privacidad y cookies
  • Condiciones de uso
  • Control de exportación
  • Aviso sobre datos del GDPR
CONECTE CON NOSOTROS
SUSCRÍBASE A NUESTRO BOLETÍN DE NOTICIAS
DIRECCIÓN DE CORREO ELECTRÓNICO
© Illinois Tool Works Inc. Todos los derechos reservados.
[email protected]
  • Política de privacidad y cookies
  • Condiciones de uso
  • Control de exportación
  • Aviso sobre datos del GDPR