Dynacell - Dynamic Load Cell ± 5000 N (± 1125 lbf)
2527-153 | Dynacell, Dynamic Load Cell. ±5000 N (±1125 lbf)
The fatigue life of the unit is 10E9 full stress reversed cycles at the capacity of the cell. Overload capability is 300% of the capacity before mechanical failure of the cell.Side load resistance is 40% of the capacity.
Dynacell is a unique load measurement device which automatically compensates for load errors induced through inertia of the load string components. A method of dynamic inertia compensation is essential for all forms of dynamic testing.
Dimensions: 68 mm (high) by 94 mm (diameter)
Transducer Mass: 2 kg
3 x M6 threads on 57 mm diameter PCD
3 x M6 threads on 75 mm diameter PCD
|Capacity||±5 kN (±1125 lbf)|
|Accessory Diameter||94 mm (3.7 in)|
|Accessory Height||68 mm (2.68 in)|
|Lower Fitting||3x M6 on 57 mm PCD and 3x M6 on 75 mm PCD|
|Static or Fatigue Rated||Fatigue|
|Upper Fitting||3x M6 on 75 mm PCD|
|Accessory Weight||1 kg (2.2 lb)|
The 2527 Series load cells are designed for use with Dynamic Testing Systems; offering exceptional performance with the ability to measure forces as low as 1/250th of the force capacity to an accuracy of 0.5% of reading. Automatic transducer recognition and electrical calibration, makes them easy to use. The load cells can withstand loads up to 150% of their force capacity without damage and 300% without mechanical failure. All Instron load cells are individually temperature-compensated and tested for accuracy and repeatability on calibration apparatus that is traceable to international standards, with a measurement uncertainty that does not exceed one-third of the permissible error of the load cell.
- 0.6 MB